VACUUM EXTRUDER

This is the last machine of brick and roofing tile production to shape the raw material as a product. The machine is composed of two main parts, the mixer and the extruder. The upper part (mixer) allows you to mix the clay one last time, to make any additional water and/or stream, then to transfer the clay to the vacuum chamber. This perfectly sealed empty chamber, located between the two parts of the machine, allows removing the air in the material; good de-aeration of the clay to ensure the quality of the end product. After passage through the vacuum chamber, the material enters the lower part (extruder). This machine allows sending the raw material by helixes, putting pressure in the extrusion part and propels the clay through a die (also called “mould”) that has the section of the end product. These two machines, extruder and mixer, can be mounted in line or perpendicular, depending on the configuration of the plant. The gears of the transmission are cut special and heat treated on the surface, which gives them excellent longevity. Welded mechanic construction and machine assembly is extremely robust. All lubrication is provided by pump oil system with filtering and cooling unit. The cooling is achieved by a radiator; filtration by the passage in a crossover, eliminating impurities. There is a permanent control of oil pressure. The material conforms to international safety standards.

Our new generation MULTA extruders allow easy operation and maintenance. You may examine technical specification of MULTA through the F models on the technical charts.

TECHNICAL FEATURES
Capacityt/h30-5040-6040-6060-8060-8070-9070-9090-12090-120
ModelØ500 CXØ550 CXØ550 FØ600 CXØ600 FØ650 CXØ650 FØ750 CXØ750 F
Auger Diametermm500550550600600650650750750
Motor PowerKw45&132
55&160
45&200
55&250
55&200
75&250
75&250
90&315
75&250
90&315
75&250
90&315
90&315
110&355
110&355
132&400
132&400
132&500

TOP